Horizontal Quench Furnaces

Horizontal Quench Furnace is Your Cost-Effective Solution to Drop Bottom Furnaces

The horizontal quench furnace is a cost- effective alternative to our drop bottom furnaces and is available in ten (10) standard sizes. The equipment utilizes an electrically operated pusher/extractor mechanism that provides a quench time of 10-15 seconds, which combined with the load capacity of up to 6,000 lbs makes it ideal for a wide range of applications.

A high capacity recirculation blower, along with fully enclosed & pressurized supply ducts, delivers heated air with a combination airflow arrangement. This type of uniform airflow ensures even heat distribution throughout the work chamber and excellent temperature uniformity.

All units are fully factory tested, adjusted and certified by a 154 point quality inspection PRIOR to shipment, which results in lower installation and start-up costs. Optional PLC control, data acquisition, trending, and reporting are also available.


  • The horizontal quench furnace is used for heat treating. It can be used for loads up to 6,000 lbs and has a quench time of 10-15 seconds. The horizontal quench furnace has maximum temperature ratings up to 1,400° F and provides excellent temperature uniformity.

Standard Operating Procedure

Parts are loaded on a work grid located on the rollers (quench platform). An electric pusher/extractor mechanism pulls the load into the furnace for heat reating. After the heating cycle is completed, the pneumatically operated vertical lift door is manually opened and the extractor mechanism pushes the load onto the quench platform and then the load is quenched. Purchasing an optional 2 tier quench platform will allow one load to be charged into the furnace while another load is quenched.

Horizontal Quench Furnace Benefits

  • Cost effective alternative to a drop bottom furnace
  • High load capacity ideal for a wide range of applications
  • Automated controls available for easier operation
  • Fully factory assembled and tested prior to shipment to reduce installation and start-up time

Quench Furnace Standard Features

  • High capacity recirculation blower
  • Quench tank water agitation pump with distribution manifold
  • Gas fired or electrically heated
  • Combination airflow through oven chamber
  • Carbon steel work grid (stainless steel also available)
  • Standard temperature uniformity of +/- 15° F, tighter tolerances available upon request
  • Air operated vertical lift oven door and quench platform
  • Main power disconnect switch
  • 480/3/60 power supply (other voltages available)
  • FM, NFPA, NEC compliant
  • Shipped completely piped, wired, fully tested and certified (as required)

Horizontal Quench Options

  • Programmable controllers and chart recorders
  • Data acquisition
  • PLC control system
  • Process timers (oven & quench)
  • Baskets
  • Energy Efficient E-pack upgrade
  • Dual tier quench platform
  • Larger capacity tanks for reduced quench temperature rises
  • Quench tank cooling
  • Stainless steel tank construction for corrosion resistance
  • Automated operation
  • Installation, start-up and training at your facility (turnkey or a working supervisor)